How to Create A Rodent-Free Planting Bed

plantbed_canva

Are rodents like mice and squirrels ruining the vegetables and crops you’ve worked hard to cultivate? Fear not!

Expert gardener Dani Baker has offered a few tips to help you keep a rodent-free planting bed this growing season.

The following is an excerpt from The Home-Scale Forest Garden by Dani Baker. It has been adapted for the web.


Creating A Rodent-Proof Planting Bed

Figure 11.16. Saffron corms planted in a reinforced cage.

Here are instructions for making a rodent-proof planting bed like the one I made for my saffron crocus crop. This size bed will accommodate 300 corms. You can adjust the length and width of the bed to accommodate the number and spacing of the bulbs you intend to plant, as well as the space you have available. I constructed mine on the soil surface because of drainage issues at the site I chose. An alternative, as long as your soil is well drained and does not have a high water table, would be to dig out an area equal in dimensions to the hardware cloth “cage” and set the cage into the excavated area. In that case, the cage does not need to be reinforced with an outer wood frame.

Materials

  • Two 14-foot (4.25 m) lengths of 5-foot-wide (1.5 m) hardware cloth (1⁄2-inch [13 mm] mesh)
  • Two 13-foot (4 m) 2 × 6 wooden planks, or one for no wood frame
  • Two 2 × 6 wooden planks, each 4 feet, 4 inches (132 cm) long, or one for no wood frame
  • Stapling gun and staples
  • Two 13-foot 1 × 3 wooden furring strips Two wooden furring strips, each 4 feet, 4 inches long
  • 3-inch (8 mm) and 11⁄2-inch (4 mm) galvanized deck screws
  • Wire-cutting tool

Process

Step 1. Cut the corners. Using a wire-cutting tool, make a 6-inch (15 cm) cut at each of the four corners of one of the lengths of hardware cloth. To the extent possible, cut through the tines as close as possible to a crossing wire, which leaves flexible ends that can later be folded over to secure the corners of the cage.

Step 2. Fold the mesh along one long edge. Place a 13-foot-long plank on edge on top of the hardware cloth, parallel to one of the long sides and 6 inches from the edge. Use a hammer to bend that side of the hardware cloth around the plank so that a 6-inch portion of the hardware cloth juts straight up.

Step 3. Fold along the other edges. Repeat this for the other three sides of the hardware cloth. This creates a “bed” of hardware cloth that is 4 feet (1.25 m) wide and 13 feet (4 m) long with 6-inch-tall sides.

Step 4. Wrap the “flaps” of hardware cloth at each of the four corners around the adjacent upright edge. Secure them in place by folding the tines at the end of each flap through and around the adjacent upright edge of hardware cloth.

Figure 11.15. Constructing a hardware cloth cage, steps 1 through 4. Illustration courtesy of Turner Andrasz.

Step 5. To install the cage, clear and level a site of the proper dimensions. Place the cage on (or in) the ground.

Step 6. To reinforce the cage if above ground, construct a wood frame around it by lining up the 13-foot planks and 4-foot 4-inch planks. Using the 3-inch screws, screw the planks together to secure them in place.

Step 7. Staple the wire cage to the inside of the wood frame.

Step 8. Sprinkle a thin layer of compost over the bottom of the wire cage and nestle crocus corms (or whatever you are plant- ing) into it at the proper spacing.

Step 9. Cover the corms, bulbs, or crowns with more compost and top that with soil, from excavating the site if available.

Step 10. Top off the bed with a layer of semi-composted wood chips.

Step 11. Lay the second piece of hardware cloth over the bed. To secure it in place and thus rodent-proof the bed, use the 11⁄2-inch screws to attach the 1 × 3 furring strips (placed over the hardware cloth) to the tops of the border planks on all four sides. If your cage is embedded in the ground, you can use heavy rocks to weigh down the hardware cloth cover so that rodents can’t slip underneath it.


Recommended Reads

10 Easy-to-Grow Flowers for Pest Control

Plants & Pests: Will Bonsall’s Advice on “Wee Beasties”

Read The Book

The Home-Scale Forest Garden

How to Plan, Plant, and Tend a Resilient Edible Landscape

$34.95

Enter your email to sign up for our newsletter and save 25% on your next order

Recent Articles

farm

Farming Against Nature

When you’re walking around the grocery store looking at the vegetables, it’s probably hard to imagine that a century ago there was twice the amount of options.

Read More
Tomato Plants in a Greenhouse

Types of Tomatoes: Deciphering the Many Varieties

If you love tomatoes, you probably already know just how many varieties of these summertime staples there are. But do you know what makes each one unique?

Read More

Embracing Sustainable Food Production: Integrating Trees and Crops

Adding the long game of trees to your system results in a deeper and more reliable, resilient and profound presence to your annual vegetable production.

Read More
basket of mushrooms

Foraging for Mushrooms: Gourmet Root Systems

For people who enjoy foraging for food in the wild, there are plenty of mushrooms to choose from — “ten thousand mushroom species to be considered on the North American continent alone”. But foraging for mushrooms should never be thought of as a game of chance. You need to know all the clues when it comes to identifying…

Read More

How to Create the Perfect Bee Hive: A Home Worth Buzzing About

For all the beekeepers and future beekeepers out there, this one is for you! Your journey to successful beekeeping begins with constructing a suitable haven for honeybees, otherwise known as the bee hive. The following is an excerpt from Raising Resilient Bees by Eric and Joy McEwen. It has been adapted for the web. Bees…

Read More