Get Ready for Maple Sugaring Season

A jar of maple syrup and a wooden spoon on a table

Everything is better with maple syrup. At least, that’s what you’ll hear when you ask Vermonters. What better way to solidify your love for all things maple than to learn how to make it yourself? If you only have a couple of trees nearby — say in your backyard — author Michael Farrell has some simple advice for maple sugaring and collecting the sap by the bucket.

The following is an excerpt from The Sugarmaker’s Companion by Michael Farrell. It has been adapted for the web.


When to Tap

One of the most difficult decisions you have to make from year to year in your sugaring operation is deciding when to tap. I always recommend tapping just a few trees in January and February to determine what is going on with sap flow conditions. In relatively cold areas, even when the temperatures get above freezing in January and February, the amount of sap flow can be negligible. The trees are basically frozen, and it takes an extended period of warm temperatures to induce substantial sap flow. In warmer regions where the winter isn’t as severe, optimum temperature fluctuations usually happen all winter and the trees may be producing a decent amount of sap in January and February. If you see this happening in your test trees, you’ll want to tap the rest of your sugarbush to catch the early sap runs.

How to Tap

Finding the Right Spot

The first step in tapping is to find a good spot to drill the hole. It doesn’t matter how nice a hole you drill, what type of spout you use, or what level of vacuum you are pulling if you have drilled into a bad section of the tree. To get a decent amount of high-quality sap, you need to drill into clear, white sapwood. It is important to avoid previous tapholes and the associated stain columns as well as other defects and rotten areas on the trunk. Large seams and wounds are easy to identify and avoid, but it takes a trained eye to locate old tapholes.

Drilling the Hole

Some people advocate drilling the hole directly into the tree whereas others recommend drilling at a slight upward angle. I usually try to achieve a perfectly straight hole but always err on the side of making it at a slight upward angle whenever necessary. No matter how you drill the hole, be sure to use a relatively new, clean, sharp drill bit that is intended for drilling into maple trees.

When you are pulling the drill out of the tree, always examine the shavings to make sure that they are pure white. If you get brown or dark-colored shavings, you have drilled into a bad part of the tree. Your sap yield will be negligible, and any sap that does flow may have a yellow tinge to it and impart off-flavors to your syrup.

Setting the Spout

The final step is placing the spout in the tree. It takes some practice to figure out how hard to tap on the spout to get it nice and snug without overdoing things. Not tapping in hard enough can cause the spout to be too loose, creating a vacuum leak. On the other hand, tapping too hard can potentially cause the wood to split, which in turn leads to vacuum leaks, lost sap, and increased wounding at the taphole. Most sugarmakers use regular hammers to set the spouts, but you don’t necessarily hammer the spouts in. Just a few gentle taps will usually do the trick until you hear a thumping sound. As soon as you can hear the difference, stop tapping on the spout.


Recommended Reads

Sap Moon Recipes for Sweet Treats

How-To Turn Sap and Syrup into Beer, Wine, and Liquor

 

Read The Book

The Sugarmaker's Companion

An Integrated Approach to Producing Syrup from Maple, Birch, and Walnut Trees

$39.95

Recent Articles

Miyawaki Method

The Miyawaki Method: Imagining a Mini-Forest’s Potential

Want to witness the magic of the mini-forest? When you practice The Miyawaki Method, a unique approach to reforestation, you’ll see an empty lot or backyard transform into a biodiverse forest before your very eyes. The following is an excerpt from Mini-Forest Revolution by Hannah Lewis. It has been adapted for the web. Photo Credit:…

Read More
urban gardening

Urban Gardening Tips: No Space? No Problem!

Do you want to learn how to transform your balconies and windowsills into productive vegetable gardens? Try urban gardening! Choosing the right crops based on climate and light conditions, along with creating a companion planting strategy to prevent pests and attract pollinators, can help maximize food production with limited space. The following is an excerpt…

Read More
spring curry

Forager’s Spring Curry: A Wild, Seasonal Recipe

Nothing says “spring” like a fresh, foraged meal! Savor the flavors of the season with this mouth-watering spring curry recipe. The following is an excerpt from Forage, Harvest, Feast by Marie Viljoen. It has a been adapted for the web. Forager’s Spring Curry This boldly flavored spring stew evolved from a forager’s version of fridge…

Read More
testing soil

Testing Soil: Healthy Soil is Just A Test Away

Testing soil in your garden is the first step to a more bountiful harvest. It’s not as hard as you might imagine, either — simply take a small sample, get it examined, and you’ll be on your way to healthy soil and a promising harvest this season. The following is an excerpt from The Regenerative Grower’s…

Read More
plant grouping

Creating A Plant Grouping: Edible Forest Gardens

Get one step closer to the edible forest garden of your dreams by creating a plant grouping! These arrangements of plants help contribute to a healthy, thriving food forest. The following is an excerpt from The Home-Scale Forest Garden by Dani Baker. It has been adapted for the web. Planning a Plant Grouping Deciding what plants to…

Read More