Check out our most recent newsletter. If you haven’t already joined click here to sign up now.
Who doesn’t love to kick off their Memorial Day weekend with a delicious cold beverage? You could be sipping one soon with Chelsea Green favorite Sandor Ellix Katz’s DIY recipe for home-brewed beer! The recipe does take a few weeks to ferment, however—- if you get going this weekend, you could have a batch to share in time for Fourth of July fireworks! Sandor is the author of Wild Fermentation: The Flavor, Nutrition, and Craft of Live-Culture Foods. ┬á
You can buy the book here—-on sale for 25% off:┬á
Here’s a taste of the book Wild Fermentation, adapted for this email:
- – -
Beer from Malted Grains
My friend Patrick Ironwood brews amazing beers in vast quantities. Patrick lives at Moonshadow, a homestead he shares with four generations of his family, including his two grandmothers, his parents, his wife, his brother and sister-in-law, and his newborn baby Sage Indigo Ironwood (three plant names!), as well as friends, interns, and visitors. The Kimmons-Ironwood clan’s woodland homestead is also home to an environmental education center, the Sequatchie Valley Institute. Patrick has been brewing since age fifteen, when his parents gave their budding do-it-yourselfer a homebrew kit and he made his first batch of beer for them.
Twenty years later, Patrick generally brews in 30-gallon (120-liter) batches and stores his beer in kegs, which involves much less work than bottling. After years of enjoying Patrick’s beer, I recently assisted him as he brewed a batch. I’ll describe his process adapted to a 5-gallon (20-liter) quantity. For a description of his setup for doing it in 30-gallon batches, see Wild Fermentation:
1. Coarsely grind the malted barley. Just crack each grain into a few chunky pieces to increase surface area; do not grind it into flour, which would make the mash pasty and cause problems.
2. Heat 2 gallons (8 liters) water in a large pot to around 160┬░F (71┬░C). Add the barley and stir well. Room-temperature barley will cool the mash. Check the temperature; we are aiming to hold the mash at 128┬░F (53┬░C). Either add cold water or continue heating until the mash reaches 128┬░F (53┬░C). Then cover, turn off the heat, and leave at this temperature for 20 minutes.
3. After 20 minutes, heat the mash to 140┬░F (60┬░C). As you heat, stir constantly so grain at the bottom won’t burn. Once you reach 140┬░F (60┬░C), cover, turn off the heat, and leave at this temperature for 40 minutes. After 20 minutes, check the temperature and reheat if it has dropped more than a couple of degrees.
4. After 40 minutes at 140┬░F (60┬░C), heat the mash to 160┬░F (71┬░C), where it will remain for 1 hour. Check the temperature every 20 minutes and reheat as needed to maintain temperature.
5. After 1 hour at 160┬░F (71┬░C), heat the mash to 170┬░F (77┬░C), stirring constantly.
6. Meanwhile, boil about 1 gallon of water.
7. After mash reaches 170┬░F (77┬░C), strain it. Set a colander in a large pot or crock and scoop the mash-grains and liquid-into the colander. As the colander fills with grain, press it with a potato masher or other kitchen implement to release liquid. Once the liquid is pressed out, pour a few cups of boiled water over the grains to rinse off additional sweet residue. This procedure is called “sparging”. Press the grains and repeat the process. After sparging, spent grains can be fed to chickens or composted. Repeat this process until all the mash has been strained and you are left with just sweet, fragrant liquid, now called “wort”.
8. Return the wort to the cooking pot and heat to a boil. Add the malt extracts and stir. This thick, concentrated wort could burn, so keep stirring. Once it returns to a boil, add half the hops. Boil with the hops for 45 minutes; keep stirring.
9. After 45 minutes, add the Irish moss, which helps clarify the beer. Five minutes later, add half the remaining hops; eight minutes after that, add the rest of the hops. Boiling hops extracts bitterness but cooks off some of volatile aromatic qualities. Adding hops toward the end of the process (these are known as “finishing hops”) releases these volatile aromatics into the beer.
10. Once the wort has boiled for 1 hour, turn off the heat. Strain the wort into a carboy or other fermenting vessel. Patrick uses a 3 percent hydrogen peroxide solution to sterilize his fermentation vessels. If you are working with a glass carboy, add the hot wort slowly to avoid shocking and shattering the glass. Top off with additional water to make 5 gallons (20 liters). Be sure to leave a few inches of head space for the beer to foam, and seal with an airlock until beer cools to body temperature.
11. Once the beer cools, sprinkle on the yeast and seal with the airlock. Ferment about 1 week to 10 days, until it stops bubbling. Prime and bottle as described above.
- – -
If you enjoyed that, you’ll enjoy other recipes in Sandor’s great book:
Thanks again for everything you do for the planet.
President & Publisher, Chelsea Green